Hurry, Limited Stock!
TP-LINK MC110CS - Fibre media converter - 100Mb LAN - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 / SC single-mode - up to 20 km - 1310 nm
TP-Link

TP-LINK MC110CS - Fibre media converter - 100Mb LAN - 10Base-T, 100Base-FX, 100Base-TX ...

  • Complies with 802.3u 10/100Base-TX, 100Base-FX standards
  • Link fault passthrough and far end fault minimize the loss caused by link failure timely
  • Provides switch configuration of half-duplex / full-duplex transfer mode for FX port
  • Extends fiber distance up to 20-60km
  • Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
  • Easy-to-view LED indicators provide status to monitor network activity easily
  • External power supply
$25
 
 
 
TP-LINK MC110CS - Fibre media converter - 100Mb LAN - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 / SC single-mode - up to 20 km - 1310 nm
The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

Estimated Availability

10 or less units in stock

*Our stock is a mix of Supplier and HT Stock.
All shipments are subject to our standard delivery policy.

Tax

Ex. GST:$22.73
GST Amount:$2.27

Details

Tech Code:AW140
Manufacturer Number:MC110CS

Images may differ slightly from actual product
 
 
  • Complies with 802.3u 10/100Base-TX, 100Base-FX standards
  • Link fault passthrough and far end fault minimize the loss caused by link failure timely
  • Provides switch configuration of half-duplex / full-duplex transfer mode for FX port
  • Extends fiber distance up to 20-60km
  • Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
  • Easy-to-view LED indicators provide status to monitor network activity easily
  • External power supply
 
Device Type
Fibre media converter - RJ-45 / SC single-mode
 
Form Factor
External
 
Cabling Type
10Base-T, 100Base-FX, 100Base-TX
 
Data Transfer Rate
100 Mbps
 
Optical Wave Length
1310 nm
 
Data Link Protocol
10Mb LAN, 100Mb LAN
 
Max Transfer Distance
20 km
 
Dimensions (WxDxH)
9.5 cm x 7.3 cm x 2.7 cm
 
 
 
General
Device Type
Fibre media converter
 
Form Factor
External
 
Networking
Connectivity Technology
Wired
 
Cabling Type
10Base-T, 100Base-FX, 100Base-TX
 
Data Link Protocol
10Mb LAN, 100Mb LAN
 
Data Transfer Rate
100 Mbps
 
Optical Wave Length
1310 nm
 
Max Transfer Distance
20 km
 
Status Indicators
Collision status, port duplex mode, power, link/activity
 
Features
Flow control, auto-negotiation, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode
 
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
 
Expansion / Connectivity
Interfaces
1 x Ethernet 10Base-T/100Base-TX - RJ-45 female
1 x Ethernet 100Base-FX - SC single-mode
 
Miscellaneous
Compliant Standards
FCC
 
Power
Power Device
External power adapter
 
Dimensions & Weight
Width
9.5 cm
 
Depth
7.3 cm
 
Height
2.7 cm
 
Environmental Parameters
Min Operating Temperature
0 C
 
Max Operating Temperature
40 C
 
Humidity Range Operating
10 - 90%
 
 
 
 
 

Quantity: