Sunix MIO6479A PCIE 2-port Serial/1-port Parallel  Card

Sunix MIO6479A PCIE 2-port Serial/1-port Parallel Card

$72.25
 
 
 
Sunix MIO6479A PCIE 2-port Serial/1-port Parallel Card
Introduction
The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6479A Multi I/O board, users can expand two RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6479A built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Features
Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
Designed to meet PCI Express Base Specification Revision 2.0.
Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
On-chip hardware auto flow control to guarantee no data loss.
Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
Support IEEE 1284-1994 parallel port standard.
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port).
* SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port).
Plug-n-Play, I/O address and IRQ assigned by system.
Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
Support Microsoft Windows, Linux, and DOS.

DESCRIPTION
Product Description 2-port RS-232 & 1-port Parallel PCI Express Multi-I/O Board
GENERAL
Interface RS-232 and IEEE1284
Controller SUNIX SUN2410 (16C950 UART Compatible)
Bus PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System
SERIAL COMMUNICATION
Interface RS-232
No. of Port 2-port
FIFO 128 byte (Hardware)
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50 bps to 115.2 Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB connector DB9 Male
PARALLEL COMMUNICATION
Interface IEEE1284
No. of Port 1-port
FIFO 16 byte (Hardware)
Signal SPP/ECP/EPP/BPP
Speed Maximum 1.8MBps
PCB connector 13x2 Pin Header
Cable Connector DB25 Female
DRIVER SUPPORT
Microsoft Client Windows XP/Vista/7 (X86/X64)
Microsoft Server Windows 2000/2003/2008 (X86/X64)
Microsoft Embedded Windows XP Embedded/POS Ready 2009/Embedded System 2009/Embedded Standard 7
Linux Linux 2.4.x / 2.6.x / 3.x
DOS DOS
REGULATORY APPROVALS
Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP/Vista/7 (X86/X64)
Microsoft Server: 2000/2003/2008 (X86/X64)
ENVIRONMENT
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)
DIMENSION
PCB Dimension 78 x 85 mm
Bracket Standard 121 mm
Bracket Space 1

Note:
* LPT port does not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Estimated Availability

10 or less units in stock

*Our stock is a mix of Supplier and HT Stock.
All shipments are subject to our standard delivery policy.

Tax

Ex. GST:$65.68
GST Amount:$6.57

Details

Tech Code:AW184
Manufacturer Number:MIO6479A

Images may differ slightly from actual product
 
 
 

Quantity: