APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V AS 3112
Battery Backup & Surge Protector for Electronics and Computers
Includes: CD with software, Telephone Cable, User Manual
Adjustable voltage sensitivity :Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms :Provides notification of changing utility power and UPS power conditions
Automatic self-test :Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification :Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools :Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets :Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Cold-start capable :Provides temporary battery power when the utility power is out.
Dataline surge protection :Provides protection of connected equipment from power surges on the data lines.
Hot-swappable batteries :Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Safety-agency approved :Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
USB connectivity :Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries :Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits
Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Audible alarms: Provides notification of changing utility power and UPS power conditions
LED status display: Quickly understand unit and power status with visual indicators.
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output power capacity: 405Watts / 700VA
Max Configurable Power (Watts): 405Watts / 700VA
Nominal Output Voltage: 230V
Output Voltage Distortion: 47 - 63 Hz
Output Frequency (sync to mains): 50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages: 220
Waveform type: Stepped approximation to a sinewave
Output Voltage Tolerance: +/- 5% static and 100% load step
Transfer Time: 6ms typical : 10ms maximum
Nominal Input Voltage: 230V
Input frequency: 50/60 Hz
Input Connections: Australian/Chinese
Cord Length: 1.83meters
Maximum Input Current: 10.0A
Batteries & Runtime
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
RBC17Typical recharge time: 16hour(s)
Battery Volt-Amp-Hour Capacity: 86
Communications & Management
Interface Port(s): USB
Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering
Surge energy rating: 310Joules
Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Filtering: Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height: 89MM, 8.9CM
Maximum Width: 224MM, 22.4CM
Maximum Depth: 311MM, 31.1CM
Net Weight: 6.93KG
Shipping weight: 7.84KG
Shipping Height: 127MM, 12.7CM
Shipping Width: 279MM, 27.9CM
Shipping Depth: 400MM, 40.0CM
Master Carton Dimensions (Length x Width x Height): 324MM
Master Carton Units: 1.0
Master Carton Weight: 16.36
Pallet Dimensions: 48inches
# of Layers per Pallet: 4.0
# of Units per Layer per Pallet: 20.0
Pallet Weight: 1400.0lbs.
Units per Pallet: 48.0
SCC Codes: 1073130427167 0
Operating Temperature: 0 - 40 °C
Operating Relative Humidity: 0 - 95 %
Operating Elevation: 0-9000meters
Storage Temperature: -15 - 40 °C
Storage Relative Humidity: 0 - 95 (non-condensing) %
Storage Elevation: 0-9000meters
Audible noise at 1 meter from surface of unit: 40.0dBA
Approvals: A-tick, C-tick, CE, Telepermit
Standard warranty: 2 years repair or replace
Equipment protection policy: Lifetime : 150000 AUD
Sustainable Offer Status
REACH: REACH: Contains No SVHCs
10 or less units in stock
*Our stock is a mix of Supplier and HT Stock.
All shipments are subject to our standard delivery policy.
This product is sold on a No Return basis
Images may differ slightly from actual product
- Battery Backup & Surge Protector for Electronics and Computers
- APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V AS 3112
- Intelligent battery management
- Automatic self-test
- Battery failure notification
4 x power SAA AS 3112 ( UPS and surge )
4 x power SAA AS 3112 ( UPS and surge )
1 x phone cable - external